Reimaging or Replacing the Cisco Business
Edition 3000 Server
This chapter contains procedures that you can perform to reimage the Cisco Business Edition 3000 server,
perform a server recovery, or replace the Cisco Business Edition 3000 server.
Perform these procedures only if your technical support team advises that you do so.
Note
•
•
•
•
•
•
•
Reimaging an MCS 7890-C1
The MCS 7890-C1 comes preinstalled with Cisco Business Edition 3000. Cisco Business Edition 3000 software
supports a reimage through a USB DVD drive only.
Reimage the server only when your technical support team advises that you do so.
Warning
USB hard disk drives and USB flash drives should not be plugged in during MCS 7890-C1 reimaging or
Note
installation.
OL-27022-01
Reimaging an MCS 7890-C1, page 453
Using a Network Cable to Set Up Server Access to the Network, page 456
Using the Cisco Network Configuration USB Flash Drive, page 457
Performing Upgrade Using an USB Flash Drive, page 458
Performing COP file Installation Using an USB Flash Drive, page 460
Performing a Server Recovery, page 461
Replacing the Cisco Business Edition 3000 Server, page 461
C H A P T E R
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
53
453