Administrator Settings - Cisco IE-3000-8TC Administration Manual

Administrator Settings

GUI: Cisco Business Edition 3000 First Time Setup Wizard and Cisco Business Edition 3000 Administrative
Interface
The Change Password page allows you to set the administrator username and password for your system.
Administrators can perform all tasks in the Cisco Business Edition 3000 GUI, including but not limited to
adding phones, users, and monitoring the system. Anyone with the username and password can log in to the
GUIs and perform configuration tasks.
For security purposes, Cisco requires that you change the default password that comes with your system.
Tip
Enter values that are difficult to guess, and remember your new username and password because the
password does not display in the Change Password page. After you complete the Cisco Business Edition
3000 First Time Setup Wizard, you use the Cisco Business Edition 3000 Administrative Interface to
change the administrator username and password (System Settings > Administrator).
The following table describes the settings that display on the Change Password page.
Table 23: Settings on the Administrator page
Setting
Username
OL-27022-01
C H A P T E R
Description
To change the username for the administrator, enter
a new value in the Username field.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
11
169