Cisco IE-3000-8TC Administration Manual page 409

Setting
Line Number
External Caller ID
Call Forward All
Show User's Phones
Cisco Mobile Solutions
Configure a supported mobile client that you want to associate with a user. You can also configure a Reach
Me Anywhere number if allowed by the usage profile of the user.
OL-27022-01
Description
For extensions (lines) that you want to associate with this user, perform the
following tasks:
1 In the Line Number field, enter a unique extension for the user. Enter an
extension that is within the extension range that is specified in the Dial Plan
page (System Settings > Dial Plan). (Line numbers must be unique to this
user.)
You can configure a maximum of 10 line numbers for each
Note
user.
2 In the External Caller ID field, enter a phone number that identifies the user
when the user makes an outgoing call that goes through the PSTN. By default,
the main business number from the dial plan displays.
3 To forward all incoming calls for the user to another phone number or to
voicemail, check the Call Forward All check box; then select To VoiceMail,
if available, or enter the phone number, including access codes, area codes,
and so on, in the Call Forward All field. (Enter a phone number as if you
were placing a call on the phone. Do not enter hyphens.) If the user updates
the Cisco Business Edition 3000 User Preferences Interface for call
forwarding, the update displays in this field. (The voicemail option only
displays if the usage profile that is assigned to the user has voicemail
enabled.)
The first row specifies the primary line for the phone. To make a secondary line
the primary line, click the arrow icon. The secondary line moves to the top of
the list and becomes the new primary line, and the former primary line becomes
the secondary line and displays immediately after the new primary line.
The phone button template that is assigned in the usage profile determines the
order of buttons on the phone. If the phone model does not support all of the
buttons that are specified in the phone button template, only the number of
buttons that the phone supports display on the phone.
The primary line displays on a Cisco Extension Mobility-enabled phone when
a user is logged into that phone. The primary line is also used with call forward
all and Reach Me Anywhere.
To add more rows, click the Plus icon. To delete a row, click the Minus icon
for the row that you want to delete.
To identify a list of phones that are associated with the assigned lines for the
user, click Show User's Phones. After you view the list, click OK. (The user
owns a phone when line 1 is assigned to the phone.)
The Show User's Phones link displays only in the Edit User page. You
Tip
can reorder the entries after the entries display.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
389