Cisco IE-3000-8TC Administration Manual page 337

Restart/Shutdown Settings
GUI: Cisco Business Edition 3000 Administrative Interface
In the Restart/Shutdown page, you can view the Cisco Business Edition 3000 software version that is installed
on the server, you can restart (reboot) or shut down the server, or you can switch from the active to inactive
version (or vice versa) of software that is installed on your server. The following table describes the settings
that display on the Restart/Shutdown page (Maintenance > Restart/Shutdown).
Cisco recommends that you do not press the power button on the server to shut down or to restart the
Caution
server unless you absolutely need to do so. If you do so, you may accidentally corrupt the file system,
which may prevent you from being able to reboot your server.
Table 76: Settings on the Restart/Shutdown page
Setting
Active Version and Inactive Version
Restart
Shutdown
OL-27022-01
C H A P T E R
Description
The active version, which is read only, is the current
installed version of Cisco Business Edition 3000
software that is running on your server. The inactive
version, which is also read only, is the previously
installed version of Cisco Business Edition 3000
software on your server. The inactive version does
not display if no previous version exists.
To stop all processes on the server and then have the
server restart, click Restart.
When you restart the server, calls in progress may
drop because the phones unregister from the system,
register with the system, and then restart.
When you click Shutdown, the server stops all
processes, shuts down, and does not restart. In
addition, the phones unregister, power down, and do
not restart. All calls in progress drop.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
36
317