Cisco IE-3000-8TC Administration Manual page 322

Connection Settings
Setting
Prepend the digits
Calling Party Transformations
Sound Settings
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
302
Description
Enter the digits to prepend to the retained digits of
the incoming called party number. Valid entries
include the digits 0 through 9, the wildcard characters
asterisk (*) and octothorpe (#), and the international
escape character +.
The final number (digits retained + prefix
Note
digits) must be equal in length to the
extension length in the system.
From the drop-down list, choose the calling party
transformation pattern for the PSTN connection.
Choose one of the following from the drop-down list
and click Save.
• Automatic—Select this option to use the calling
party transformation pattern based on the dial
plan. Click View to view the calling party
transformation.
The Calling Party Transformation
Note
patterns will not displayed until the
PSTN connection has been created.
You must configure the PSTN
connection and then edit to view or
modify the transformation pattern.
For information on configuring the calling party
transformation, see digit discard instructions,
see Calling Party Transformations Settings, on
page 310.
• Set Manually—Select this option to manually
configure the calling party transformation
pattern.
Click Edit to edit the digit discard instructions.
The Calling Party Transformation
Note
patterns will not displayed until the
PSTN connection has been created.
You must configure the PSTN
connection and then edit to view or
modify the transformation pattern.
The calling party transformation patterns that
appears when you edit the PSTN connection,
depend on the numbering plan that you choose
from the Dial Plan drop-down list on the System
Settings > Dial Plan > General tab.
OL-27022-01