Dial Plan Settings - Cisco IE-3000-8TC Administration Manual

Dial Plan Settings

Impacted GUIs: Cisco Business Edition 3000 First Time Setup Wizard and Cisco Business Edition
3000 Administrative Interface
Tip Dial plan settings also display in the Cisco-provided .xls data configuration file. Translation rule settings
are not included in the Cisco-provided .xls data configuration file.
Dial Plan configuration settings allows you to configure the dial plan including the business number,
extensions, and dialing prefixes. You can create a simplified dial plan for sites, users, and phones. See the
following section for more information on setting up your dial plan.
•
•
•
•
•
Dial Plan Settings
On the Dial Plan page, you can configure the main business number for the company, the extension length
and extension range, and access codes that the user presses to perform certain tasks, such as accessing the
operator. The following table describes the settings on the Dial Plan page. In the Cisco Business Edition 3000
Administrative Interface, these settings display under the General tab. In the Cisco Business Edition 3000
First Time Setup Wizard, no tabs display on this page.
Table 46: Settings on the Dial Plan page (General tab)
Settings
Business Number Information
OL-27022-01
Dial Plan Settings, page 223
Translation Rules Settings, page 226
Block Rules Settings, page 228
Abbreviated Dialing Settings, page 230
Application Dial Rules Tab Settings, page 232
Description
C H A P T E R
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
25
223