Hunt List Settings - Cisco IE-3000-8TC Administration Manual

Hunt List Settings

GUI: Cisco Business Edition 3000 Administrative Interface
The following table describes the settings that display on the Hunt List page (Users/Phones > Hunt List).
A hunt list consists of a group of extensions that can answer calls. These extensions can belong to users or
departments. You can assign any extension to the hunt list, but only those extensions that are assigned to
phones can actually answer the calls.
An extension may belong to more than one hunt list.
Table 51: Settings on the Hunt List page
Setting
Pilot Extension
Name
OL-27022-01
C H A P T E R
Description
Enter the extension that serves as the pilot for the
hunt list. This extension serves as the trigger for
hunting to begin. When this extension is called, Cisco
Business Edition 3000 uses the method that is
specified in the Hunt Type setting to distribute the
call to an extension in the hunt list.
Enter an extension that is in the dial plan, but do not
assign the extension to a user or department.
Enter a unique name for the hunt list. To easily
identify the hunt list, consider appending the pilot
extension to the name; for example, hl5001.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
26
235