Cisco IE-3000-8TC Administration Manual page 304

Connection Settings
Setting
Device Name
Connection Settings
Provider IP Address
Provider Port
BE3000 Port
Show/Hide Advanced Settings
Note
Transport Type Information
Outgoing Transport
Media Information
SDP Session-level Bandwidth
Modifier for Early Offer and
Re-INVITEs
Include Inactive SDP attribute in
mid-call media changes
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
284
In this section, the parameters that are exposed by the service provider for editing appear on the
Cisco Business Edition 3000 Administrative Interface.
Description
Displays the name of the gateway.
Specify the IP address of the service provider.
Specify the port of the service provider
Specify the port of the Cisco Business Edition 3000 to which the
service provider is connected.
From the drop-down list box, choose the outgoing transport mode.
Select one of the following:
• TCP
• UDP
The Session Level Bandwidth Modifier specifies the maximum
amount of bandwidth needed when all the media streams are used.
There are three Session Level Bandwidth Modifiers: Transport
Independent Application Specific (TIAS), Application Specific (AS),
and Conference Total (CT).
Select one of the following options to specify which Session Level
Bandwidth Modifier to include in the SDP portion of SIP Early Offer
or Reinvite requests.
• TIAS and AS
• TIAS only
• AS only
• CT only
Check this check box to allow the Cisco Business Edition 3000 to
send an INVITE a=inactive SDP message during call hold or media
break during supplementary services.
OL-27022-01