Adding A Department And A Public-Space Phone; Setting Up The Cisco Vg224 Analog Phone Gateway For Fax - Cisco IE-3000-8TC Administration Manual

Administration guide
Hide thumbs Also See for IE-3000-8TC:
Table of Contents

Advertisement

Tip

Adding a Department and a Public-Space Phone

A department is a unique-user type that is used exclusively for public-space phones; this user is reserved for
phones in cafeterias, lobbies, break rooms, and so on. A public-space phone cannot support Reach Me
Anywhere.
You do not configure passwords for departments, unlike users (Users/Phones > Users).
For information on adding a department and a public-space phones, use the following procedure.
Procedure
Step 1
Identify the departments that you need for your system.
For example, you may create a department for a phone in each bream room, for each phone in the lobby, for
a phone in the cafeteria and for fax support. To identify the number of departments that you need, identify
how many public-space phones that you have.
Step 2
Configure the department.
Because a department is a special type of user, make sure that you create a department for each public-space
phone; for example, if you have 5 public-space phones, you probably need 5 departments, one department
per phone.
Tip
Step 3
Verify that you have enough licenses installed on the Cisco Business Edition 3000 server. If necessary, obtain
and install additional licenses before you add the phones.
Step 4
Add the public-space phone(s).
In Cisco Business Edition 3000 Administrative Interface, select Users/Phones > Phones.
If you have not already plugged the phone into the network, you can plug the phone in at this time.
Step 5
Make test calls with the public-space phones.

Setting Up the Cisco VG224 Analog Phone Gateway for Fax

To set up the Cisco VG224 Analog Phone Gateway to provide fax support for a site, perform the tasks that
are described in the following procedure.
OL-27022-01
You cannot add the phone configuration if licenses do not exist for the phones. Select Maintenance
> Manage Licenses to view and install licenses.
To edit or delete phone configuration, select Users/Phones > Phones in the Cisco Business Edition
3000 Administrative Interface.
If you have not installed the phones, remember to install them on the network. Remember to make test
calls with the phones after they are installed.
Make sure that you add the extensions to the department
page.
Adding a Department and a Public-Space Phone
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
143

Advertisement

Table of Contents
loading

This manual is also suitable for:

Business edition 3000

Table of Contents