Gui; Add A Spa8800 Analog Phone From The Phones Page; Edit A Spa8800 Analog Phone From The Phones Page - Cisco IE-3000-8TC Administration Manual

Note
Configure the SPA8800 Analog Phones on the Cisco Business Edition 3000 GUI
Use the following procedures to add, edit, or delete SPA8800 analog phones and other devices from the Cisco
Business Edition 3000 GUI.

Add a SPA8800 analog phone from the Phones page

Procedure
Step 1 From the Phones page, click the Add Phone button.
The Add Phone window appears.
Step 2 Choose Analog Phone (SPA8800) from the drop-down menu.
Step 3 Choose Add Device from the Device Name drop-down menu to add a new SPA8800 and proceed to Step 4.
To select an existing SPA8800, proceed to Step 5.
The Add Device window appears.
Step 4 Enter the MAC address and the IP address (the name is derived from the MAC address) of the new SPA8800.
Click OK. Devices are added through modal dialog box, with a value returned to Add Phone dialog box.
The Device Name now appears in the Add Phone window, along with the Device Port. Proceed to Step 6.
Step 5
To add an existing SPA8800, select a device name from the drop-down list. Only available ports are listed in
the Device Port field. If certain ports are unavailable, the Device Port field defaults to the next available port.
The Phone Name is filled out automatically based on the SPA8800 MAC address and port number.
Step 6
Choose an extension from the drop-down menu.
All configured extensions are listed in the drop-down menu.
Step 7 Click OK to add the phone and return to Phones table.
Note

Edit a SPA8800 analog phone from the Phones page

Procedure
Step 1
To edit an analog phone, click the Edit button for that phone in the Phones table.
The Edit window appears.
Step 2 Edit the description and extensions.
Step 3
Click Save in the Edit window to return to the Phones table.
Note
The device reset dialog box will appear notifying the user that the SPA8800 device will be reset and all calls
of the associated phones and PSTN connections will be disconnected.
OL-27022-01
An associated device is not deleted as a result of removing the connection. A device can be deleted
only from the Devices page.
Any change made on the SPA8800 connection and phone results in a reboot of the SPA8800. Reboots
for configuration changes can take several minutes to take effect.
Any change made on the SPA8800 connection and phone results in a reboot of the SPA8800. Reboots
for configuration changes can take several minutes to take effect.
Any change made on the SPA8800 connection and phone will cause the SPA8800 to reboot. Reboots
for configuration changes can take several minutes to take effect.
Components of the Cisco Business Edition 3000 System
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
21