Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless device. This chapter includes
these sections:
Enabling the Radio Interface, page 6-2
•
Configuring the Role in Radio Network, page 6-2
•
Configuring Dual-Radio Fallback, page 6-5
•
Configuring Radio Data Rates, page 6-7
•
Configuring MCS Rates, page 6-10
•
•
Configuring Radio Transmit Power, page 6-11
•
Configuring Radio Channel Settings, page 6-14
•
Configuring Location-Based Services, page 6-21
Enabling and Disabling World Mode, page 6-22
•
Disabling and Enabling Short Radio Preambles, page 6-23
•
Configuring Transmit and Receive Antennas, page 6-24
•
Enabling and Disabling Gratuitous Probe Response, page 6-25
•
Disabling and Enabling Aironet Extensions, page 6-26
•
Configuring the Ethernet Encapsulation Transformation Method, page 6-27
•
Enabling and Disabling Reliable Multicast to Workgroup Bridges, page 6-28
•
Enabling and Disabling Public Secure Packet Forwarding, page 6-29
•
Configuring the Beacon Period and the DTIM, page 6-30
•
Configure RTS Threshold and Retries, page 6-31
•
•
Configuring the Maximum Data Retries, page 6-32
•
Configuring the Fragmentation Threshold, page 6-32
•
Enabling Short Slot Time for 802.11g Radios, page 6-33
Performing a Carrier Busy Test, page 6-33
•
Configuring VoIP Packet Handling, page 6-33
•
Viewing VoWLAN Metrics, page 6-34
•
OL-14209-01
C H A P T E R
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
6
6-1