Configuring Wireless Radio Settings; Wireless Radio Configuration From The Web Interface - Cisco Small Business AP541N Administration Manual

Configuration Examples

Configuring Wireless Radio Settings

STEP 13
STEP 14
STEP 15
Configuring Wireless Radio Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Set the value of instance 3 in the apBssWpaAllowed object to false (2).
Set the value of instance 3 in the apBssWpaCipherTkip object to false (2).
Set the value of instance 3 in the apBssWpaCipherCcmp object to true (1).
This example shows how to configure wireless Radio 1 with the following settings:
• Mode: IEEE 802. 1 1b/g/n
• Channel: 6
• Channel Bandwidth: 40 MHz
• Maximum Stations: 100
• Transmit Power: 75%

Wireless Radio Configuration from the Web Interface

Log onto the access point and navigate to the Wireless > Advanced Settings page.
Make sure the number 1 appears in the wireless Radio field and that the status is
On.
From the Mode menu, select 802. 1 1b/g/n.
From the Channel field, select 6.
From the Channel Bandwidth field, select 40 MHz.
In the Maximum Stations field, change the value to 100.
In the Transmit Power field, change the value to High.
The next window shows the Advanced Settings page with the settings specified
in this example.
8
153