Inter-Access Point Protocol Messages - Cisco M10-RM Software Manual

Inter-Access Point Protocol Messages

Error Message SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: "IOS crypto FIPS self test passed."
Error Message SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: "RADIO crypto FIPS self test passed
on interface %s %d."
Error Message DOT11-6-MCAST_DISCARD: "%s mode multicast packets are discarded in %s
multicast mode."
Inter-Access Point Protocol Messages
Error Message DOT11-6-STANDBY_ACTIVE: "Standby to Active, Reason = %s (%d)."
Error Message DOT11-6-STANDBY_REQUEST: "Hot Standby request to shutdown radios from
%e."
Error Message DOT11-6-ROGUE_AP: "Rogue AP %e reported. Reason: %s."
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
C-20
SOAP FIPS self test passed.
Explanation
None.
Recommended Action
SOAP FIPS self test passed on a radio interface.
Explanation
None.
Recommended Action
The access point configured as a workgroup bridge and drops infrastructure mode
Explanation
multicast packets in client mode and drops client mode multicast packets in infrastructure mode.
None.
Recommended Action
The access point is transitioning from standby mode to active mode for the indicated
Explanation
reason.
None.
Recommended Action
The indicated standby access point has requested that this access point shut down its
Explanation
radio interfaces because a failure has been detected on one of this access point's radio interfaces.
None.
Recommended Action
A station has reported a potential rogue access point for the indicated reason.
Explanation
Recommended Action None.
Appendix C Error and Event Messages
OL-14209-01