Using The Web-Browser Interface - Cisco M10-RM Software Manual

Using the Web-Browser Interface

This chapter describes the web-browser interface that you can use to configure the wireless device. The
details regarding the configuration parameters are contained in the help system. This chapter contains
these sections:
Using the Web-Browser Interface for the First Time, page 2-3
•
Using the Management Pages in the Web-Browser Interface, page 2-3
•
Enabling HTTPS for Secure Browsing, page 2-5
•
Using Online Help, page 2-14
•
Disabling the Web-Browser Interface, page 2-15
•
The web-browser interface contains management pages that you use to change the wireless device
settings, upgrade firmware, and monitor and configure other wireless devices on the network.
The following parameters can be configured by using the web browser interface.
VLAN Configuration
•
SSID configuration
•
VLAN-to-SSID mappings
•
• Gain and power settings
• Maximum reach
• Maximum throughput
Light Extensible Authentication Protocol (LEAP) configuration (including LEAP/RADIUS server)
•
Local user profiles for local LEAP server
•
Encryption modes
•
Wireless MAC filter
•
Detect MACs for filter (capture network discovered MAC addresses and export to MAC filter list)
•
Broadcast SSID
•
The wireless device web-browser interface is fully compatible with Microsoft Internet Explorer
Note
version 5.56.0 on Windows 98, 2000, and XP platforms, and with Netscape version 7.17.0 on
Windows 98, 2000, XP, and Solaris platforms.
OL-14209-01
C H A P T E R
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
2
2-1