Configuring Qos - Cisco M10-RM Software Manual

Configuring QoS

This chapter describes how to configure quality of service (QoS) on your access point. With this feature,
you can provide preferential treatment to certain traffic at the expense of others. Without QoS, the access
point offers best-effort service to each packet, regardless of the packet contents or size. It sends the
packets without any assurance of reliability, delay bounds, or throughput.
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Note
Command Reference for Cisco Aironet Access Points and Bridges for this release.
This chapter consists of these sections:
Understanding QoS for Wireless LANs, page 15-2
•
Configuring QoS, page 15-5
•
QoS Configuration Examples, page 15-14
•
OL-14209-01
C H A P T E R
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
15
15-1