Cisco M10-RM Software Manual page 254

Configuring WDS
On the access point that you want to configure as your primary WDS access point, follow these steps to
configure the access point as the main WDS candidate:
Browse to the Wireless Services Summary page.
Step 1
page.
Figure 12-5
Click WDS to browse to the WDS/WNM Summary page.
Step 2
On the WDS/WNM Summary page, click General Setup to browse to the WDS/WNM General Setup
Step 3
page.
Figure 12-6
Check the Use this AP as Wireless Domain Services check box.
Step 4
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
12-10
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection
Wireless Services Summary Page
Figure 12-6 shows the General Setup page.
WDS/WNM General Setup Page
Figure 12-5 shows the Wireless Services Summary
OL-14209-01