Cisco M10-RM Software Manual page 267

Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Figure 12-15
On the SSID that supports CCKM, select these settings:
Step 6
If your access point contains multiple radio interfaces, select the interfaces on which the SSID
b.
applies.
Select Network EAP under Authentication Settings. When you enable CCKM, you must enable
c.
Network EAP as the authentication type.
OL-14209-01
Global SSID Manager Page
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
Configuring Fast Secure Roaming
12-23