Configuring Access Points To Support Fast Secure Roaming - Cisco M10-RM Software Manual

Configuring Fast Secure Roaming

Configuring Access Points to Support Fast Secure Roaming

To support fast, secure roaming, the access points on your wireless LAN must be configured to
participate in WDS and they must allow CCKM authenticated key management for at least one SSID.
Follow these steps to configure CCKM for an SSID:
Browse to the Encryption Manager page on the access point GUI.
Step 1
the Encryption Manager page.
Figure 12-14
Click the Cipher button.
Step 2
Select CKIP + CMIC from the Cipher drop-down menu.
Step 3
Click Apply.
Step 4
Browse to the Global SSID Manager page.
Step 5
Manager page.
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
12-22
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection
Encryption Manager Page
Figure 12-14
Figure 12-15 shows the top sections of the Global SSID
shows the top section of
OL-14209-01