Cisco M10-RM Software Manual page 448

Checking the Top Panel Indicators
Table 22-4 1250 Series Access Point LED Signals
Message type Ethernet LED
Boot loader status Green
Green
Off
Off
Off
Amber
Green
Green
Off
Association status —
—
Operating status Green
Blinking green
—
—
Blinking green
Boot loader warnings Off
Red
Amber
Off
Blinking green
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
22-12
Status LED Radio LED
Off Amber
Green Green
Off Red
Blinking green Blinking green
Green Green
White Off
Blinking blue Off
Blinking green Green
Off Off
Green —
Blue —
— —
— —
— Blinking green
Blinking blue —
Blinking green Blinking green
Blinking red Off
Red Off
Blinking blue Off
Red Red
Blinking green Red
Chapter 22 Wireless Device Troubleshooting
Meaning
DRAM test in progress.
DRAM memory test ok.
Board initialization in progress.
Initialize Flash file system.
Flash memory test ok.
Initialize Ethernet.
Ethernet test ok.
Starting Cisco IOS.
Initialization ok.
Normal operating condition, but no wireless
client devices are associated with the unit.
Normal operating condition, at least one wireless
client device is associated with the unit.
Ethernet link is operational.
Transmitting or receiving Ethernet packets.
Transmitting or receiving radio packets.
Software upgrade in progress.
Access point location command.
Ethernet link not operational.
Ethernet failure.
Configuration recovery in progress
(Mode button pressed for 2 to 3 seconds).
Image recovery
(Mode button pressed for 20 to 30 seconds).
Image recovery in progress and Mode button is
released.
OL-14209-01