Configuring A Repeater Access Point - Cisco M10-RM Software Manual

Chapter 19 Configuring Repeater and Standby Access Points and Workgroup Bridge Mode
Figure 19-1

Configuring a Repeater Access Point

This section provides instructions for setting up an access point as a repeater and includes these sections:
•
•
•
•
•
•
•
OL-14209-01
Access Point as a Repeater
Access Point
(Root Unit)
Default Configuration, page 19-4
Guidelines for Repeaters, page 19-4
Setting Up a Repeater, page 19-5
Verifying Repeater Operation, page 19-6
Aligning Antennas, page 19-6
Setting Up a Repeater As a LEAP Client, page 19-7
Setting Up a Repeater As a WPA Client, page 19-8
Wired LAN
Access Point
(Repeater)
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
Configuring a Repeater Access Point
19-3