Configuring Radio Management - Cisco M10-RM Software Manual

Configuring Radio Management

Configuring Radio Management
When you configure access points on your wireless LAN to use WDS, the access points automatically
play a role in radio management when they interact with the WDS device. To complete the radio
management configuration, you configure the WDS device to interact with the WLSE device on your
network.
Follow these steps to enable radio management on an access point configured as a WDS device:
Browse to the Wireless Services Summary page.
Step 1
page.
Figure 12-16
Click WDS to browse to the General Setup page.
Step 2
On the WDS/WNM Summary page, click Settings to browse to the General Setup page.
Step 3
shows the General Setup page.
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
12-28
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection
Wireless Services Summary Page
Figure 12-16 shows the Wireless Services Summary
Figure 12-17
OL-14209-01