External Radius Server Error Messages; Lwapp Error Messages - Cisco M10-RM Software Manual

External Radius Server Error Messages

External Radius Server Error Messages
Error Message RADUYS:response-authenticator decrypt fail, paklen 32

LWAPP Error Messages

Error Message LWAPP-3-CDP: Failure sending CDP Update to Controller. Reason "s"
Error Message LWAPP-3-CLIENTERRORLOG: "s"
Error Message LWAPP-3-CLIENTEVENTLOG: "s"
Error Message LWAPP-3-UNSUPPORTEDRM: Got unsupported CCX RM Measurement "s" request
"d" from Controller.
Error Message LWAPP-5-WRONG_DFS_SLOT: DFS action on non-DFS radio "d"
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
C-26
Explanation This error message means that there is a mismatch in the RADIUS shared key between
the RADIUS server and the access point.
Make sure that the shared key used on the RADIUS server and the access point
Recommended Action
are the same.
Explanation Couldn't send access point CDP update to controller
No action is required.
Recommended Action
This log message indicates an LWAPP client error event. The message is logged to help
Explanation
in troubleshooting LWAPP access point join problems.
No action is required.
Recommended Action
This log message indicates an LWAPP client notification event. The message is logged
Explanation
to help in troubleshooting LWAPP access point join problems.
No action is required.
Recommended Action
Got unsupported CCX radio managment measurement request from controller.
Explanation
No action is required.
Recommended Action
DFS action on radio b/g
Explanation
No action is required.
Recommended Action
Appendix C Error and Event Messages
OL-14209-01