Cisco M10-RM Software Manual page 256

Configuring WDS
Figure 12-7
Create a group of servers to be used for 802.1x authentication for the infrastructure devices (access
Step 10
points) that use the WDS access point. Enter a group name in the Server Group Name field.
Select the primary server from the Priority 1 drop-down menu. (If a server that you need to add to the
Step 11
group does not appear in the Priority drop-down menus, click Define Servers to browse to the Server
Manager page. Configure the server there, and then return to the WDS Server Groups page.)
Note
Step 12 (Optional) Select backup servers from the Priority 2 and 3 drop-down menus.
Step 13 Click Apply.
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
12-12
Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection
WDS Server Groups Page
If you don't have an authentication server on your network, you can configure an access point
or an ISR as a local authentication server. See
Local Authenticator," for configuration instructions.
Chapter 9, "Configuring an Access Point as a
OL-14209-01