Completed Ars Worksheet-Automatic Route Selection Tables - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
System Features
Number of exchanges in the calling area _______________
Trunk Pool No.
Preferred Trunk Pools
For toll calls (Table 17)
For local calls (Table 18)
Figure 4-1. Completed ARS Worksheet—Automatic Route Selection Tables
This section contains instructions for using the information you recorded on the
worksheet to prepare the ARS tables. The system can have as many as 20 ARS
tables—16 are programmed and 4 are factory set (Dial 0, Special Number, Default
Local, and Default Toll tables).
Of the 16 programmable tables, each may contain one of the following types of
information:
6-Digit Tables. If the cost of calls to another area code varies according to
the exchange, this table can be used to route calls on different trunk pools,
depending on both the area code and the exchange. An area code is the
first entry, and the remaining 99 entries are exchanges within the area
code. The system scans the first six digits of the user-dialed number (area
code and exchange) to route the call.
Automatic Route Selection Worksheet*
Trunk Type
Toll
Number of Area Codes, Exchanges,
Type of Dial
or Network Destinations for which
Local Network
Trunk Pool is Used
Issue 1
April 1999
4-62