Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 27

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
Prior Releases: Features and Enhancements
Release 6.1 Enhancements (August 1998)
Transfer Redirect
When an Automated Attendant transfers a call to a non-local extension, the
transferring MERLIN LEGEND System monitors the call to ensure that it is
answered. If the non-local extension is not available, or the call is not answered
within the transfer redirect timeout period (fixed at 32 seconds), the call stops
ringing at the non-local destination and is redirected to the extension on the same
system as the Automated Attendant that is programmed to receive redirected
calls. This redirect extension can be a QCC queue, a calling group, or an
individual extension.
Direct Station Selector
Now users can press a Direct Station Selector (DSS) button for a non-local
extension to make or transfer calls to that extension. No busy indication, however,
is displayed by the DSS for non-local extensions.
Call Forwarding
The Forward feature now can be used to send calls to non-local extensions
across the private network.
SMDR
In addition to SMDR options for non-network calls placed to and from the local
system, system managers now can program SMDR to log incoming and outgoing
UDP calls, or they can choose to log no UDP calls. The factory setting is to record
all UDP calls.
Customers who use a call accounting system may not want to fill the database
with calls coming and going across the private network. These customers may
choose not to log UDP calls.
Decrease in Call Setup Time
The setup time for a call across a private network has been reduced by
programming the number of UDP digits expected.
PRI Switch Type Test
A new maintenance test, the PRI Switch Type Test, has been created to allow
Lucent Technologies technicians or authorized dealers to automatically determine
if each end of the PRI tandem trunks has been programmed correctly. The test
works for directly connected MERLIN LEGEND Systems, not for DEFINITY
systems.
For a PRI tandem trunk to operate correctly between two MERLIN LEGEND
Systems, one system must have the PRI Switch Type set to Network, and the
other system must have the PRI Switch Type set to PBX. If both ends of the PRI
0
0
0
0
0
0
Issue 1
April 1999
xxvii
®