Analog Direct-Line Console - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
3 Lines/Trunks
Assigning Telephone Buttons
22 BUTTON
5
3 8
4
2 7
3
1 6
SA Icom
2
5
Voice
SA Icom
1
4
Ring
Figure 3-28.

Analog Direct-Line Console

NOTE:
If the system has more than 29 lines, Alarm, Night Service, and
Send/Remove Message are replaced with lines 30, 31, and 32.
The system assigns lines/trunks to buttons on DLCs in the order in which the
lines/trunks are connected to the control unit. You can change the factory-set
assignments by removing, adding, or changing the order in which lines/trunks are
assigned to buttons for each DLC operator.
If the system has more than the number of factory-assigned lines/trunks to
operator consoles, be sure to change the line/trunk assignment so that all lines/
trunks you want answered by a DLC operator appear on at least one operator
position.
DISPLAY CONSOLE WITH DSS
34 BUTTON
10 11
9
21
9 12
10
22
13
8
11
23
14
7
12
24
6 15
13
25
16
14
26
17
15
27
18
16
28
19
17
29
Alarm
20
18
30
Night
21
19
Serv
31
Send/
Remove
22
20
Msg 32
Note: Alarm, Night Service, and Send/Remove Msg will be replaced
with Lines 30, 31, and 32 if the system has that many lines.
23
20
10
24
11 21
25
12
22
26
13
23
27
14
24
28
25
15
29
16 26
30
17
27
31
28
18
32
19
29
Trnsfr Recall
33
Shift 2
Shift 1
34
Issue 1
April 1999
3-74
30
40
31
41
32
42
33
43
34
44
35
45
36
46
37
47
38
48
39
49
Conf
Drop
Msg
Shift 3
Stat