Queued Call Console (Hybrid/Pbx Mode Only) - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
Telephone and Extension Features
Forms Needed
2a, System Numbering: Extension Jacks
4b, Analog Multiline Telephone
4d, MLX Telephone
4e, MFM Adjunct: MLX Telephone
4f, Tip/Ring Equipment
4h, ETR Telephone
4j, MLS Telephone
5a, Direct-Line Console (DLC): Analog
5b, Direct-Line Console (DLC): Digital
5c, MFM Adjunct: DLC
5d, Queued Call Console (QCC)
6b, Optional Extension Features
6g, Call Restriction Assignments and Lists
6h, Authorization Codes
6i, Pool Dial-Out Code Restrictions
11, Service Observing: Group Assignment
Floor plan

Queued Call Console (Hybrid/PBX Mode Only)

Use these instructions if the system includes one or more QCCs. Otherwise, skip
to the next section,
Planning Form Instructions
1. Transfer the user information from Form 2a, System Numbering: Extension
Jacks to each copy of Form 5d, by filling in the Logical ID, Extension No.,
and Person or Location spaces. Use the Button Diagram on Form 5d as a
guide for labeling the operator console buttons. You cannot change the
button assignments shown. If the QCC Voice Announce feature is enabled,
however, the Call 5 button becomes a VA (Voice Announce) button. Refer
to the
2. Check the box under the Adjuncts heading that applies to the equipment at
the extension (see the floor plan).
3. Under Message Center Operator, check No if the QCC will not be a
message center, or Yes if it will be a message center.
''Pool Dial-Out Code Restriction (Hybrid/PBX Mode
''Operator Features''
4
section later in this chapter.
Issue 1
April 1999
4-3
4
Only)."
4