Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 256

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
4 Features
System Features
Planning Form Instructions
NOTE:
As a visual aid to distinguish lines during programming, every fourth line on
the form is shaded.
1. Review the analysis of question 9 on the Employee Communication
Survey.
2. On Form 10b, System Speed Dial:
a.
b.
c.
Write the label (maximum: 11 characters) to be displayed for the
number in the Name column.
Write each telephone number (maximum: 40 digits) in the
Telephone Number column.
To display no number (Marked System Speed Dial entry), check the
No box in the Display column (the factory setting is Yes).
NOTES:
Marked System Speed Dial entries (entries that do not display)
are not affected by the Second Dial Tone Timer setting. If the
Central Office does not immediately supply dial tone when a star
code is entered and a Marked System Speed Dial entry uses star
codes, then the appropriate number of pauses (each 1.5
seconds) must be programmed in the entry following each star
code.
When a Marked System Speed Dial number (the dialed number
is suppressed from the display) is used to dial a number, calling
restrictions (such as toll or outward restrictions, or Allowed and
Disallowed Lists) assigned to that extension are overridden.
When an unmarked System Speed Dial or a Personal Speed Dial
number is used to dial a restricted number, the call cannot be
completed unless the number is on the Allowed List for that
extension.
Issue 1
April 1999
4-58
4