Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual page 81

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
1 Before You Begin
Obtaining a Floor Plan
4. Indicate the type of adjunct at each location. For example, write
symbol.
5. Indicate any additional equipment, such as a Station Message Detail
Recording (SMDR) printer, Call Accounting System device, equipment
required for off-site telephones, and so on.
6. Indicate the locations where AC power is available and/or required, for
example, for a Multi-Function Module (MFM), a console with two Direct
Station Selectors (DSSs), or an Integrated Services Digital Network (ISDN)
terminal adapter.
The floor plan does not need to be elaborate or to scale. Keep the floor plan on
hand. Refer to it during planning and complete it (by filling in extension numbers)
when you get to
(analog modem),
''Numbering the System''
, or other type of adjunct beneath the
in Chapter 2.
Issue 1
April 1999
1-13
,