Configuring The Triton Analog Trunk Ls/Gs And Ls Boards - Altigen Altiware OE 4.5 System Administration & Installation Manual

Parameter
Channel Mapping
List
Span Info
Board Configuration
Reset Board
Configuring the Triton Analog Trunk LS/GS and
LS Boards
New with AltiWare OE 4.5 is the Triton Analog Trunk board. This is a long
form factor PCI telephony card that supports 12 trunks, and is available in
two models; loop start/ground start (LS/GS) and loop start (LS). Both
models have the same features regarding LS. The LS/GS board is required
when ground start trunks may be required.
AltiWare OE System Installation & Administration Manual
Description
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
and click the Reset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokes a channel configuration window.
Refer to the Line Properties button in
Extension Configuration. See "Triton Analog
Station Line Properties" on page 201.
Not available for Triton Analog Station boards.
Displays the board's serial number.
Resets the board, after you confirm by accepting a
warning that resetting a board will disconnect all
calls in progress on that board.
Important:
Be sure to inform all users before
resetting a board.
Board Configuration
145