Configuring The Triton Analog Trunk Ls/Gs And Ls Boards - Altigen AltiContact Manager Version 4.6 Administration Manual

Configuring the Triton Analog Trunk LS/GS and LS Boards

Parameter
Board Configuration
Reset Board
Configuring the Triton Analog Trunk LS/GS and
LS Boards
The Triton Analog Trunk board is a long form factor PCI telephony card
that supports 12 trunks, and is available in two models; loop start/ground
start (LS/GS) and loop start (LS). Both models have the same features
regarding LS. The LS/GS board is required when ground start trunks may
be required.
Double click the board's icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 5. Board Configuration window (Triton Analog Trunk)
6-6 AltiContact Manager Administration Manual
Description
Displays the board's serial number.
Resets the board, after you confirm by accepting a
warning that resetting a board will disconnect all
calls in progress on that board.
Important:
Be sure to inform all users before
resetting a board.