Software Installation
10. Setup will check AltiGen boards on your system.
Note: Setup will terminate if T1 Rev. A1/A2 or VoIP Rev. A1/A2
boards are found. These boards are not supported in OE 4.5.
11. Setup will create a user account for AltiWare services. AltiGen
recommends that you do not change the default password. If you still
wish to change this, you may enter a password (no longer than 14
characters) for this account and click Next.
12. Setup is creating the user account.
13. Setup will install AltiWare OE into a destination folder. Click Next to
install to the folder, or click Browse to install to a different folder.
AltiWare OE System Administration Manual
49