Collecting Digits - Altigen Altiware OE 4.5 System Administration & Installation Manual

Table 11. Auto Attendant Actions
Action
Call - Collect Exten-
sion
Call - Directory Ser-
vice
Call - Disconnect
VM - Record Mes-
sage
VM - Mailbox Access
Adv. - System Call
Back
Adv. - Collect Digits
Adv. - Data Directed
Routing

Collecting Digits

When you select the Collect Digits action, the caller is prompted to enter
more digits. Once a minimum number of digits are entered, the system
proceeds to open a single item expansion of the Collect Digits action. In the
item tree at the left, you can see a "& -" appear as an expanded item action.
AltiWare OE System Installation & Administration Manual
Auto Attendant Configuration
Description
Call the extension entered by the user.
Lists the system users and their extensions to the
caller. For this to work properly, users need to record
their directory names.
Disconnects the call.
Records the caller's message. A drop-down list
appears from which you select the extension to which
to route the voice message.
AltiGen Voice Mail System
Routes the call to the
voice mailbox after successful login. This is nor-
mally assigned to the # digit.
Calls the user at a remote location, only after the
caller logs in with extension and password. The
caller should enter a 1 and the area code if it is a long
distance number, or 011 and the country code if it is
an international number. You must be using a Cen-
trex system to use this feature.
See the discussion below on "Collecting Digits".
Prompts the caller to input digits or text and use the
data entry to route the call. This allows third party
applications to route incoming calls based on caller
information.
249