Altigen Altiware OE 4.5 System Administration & Installation Manual page 188

Hide thumbs Also See for Altiware OE 4.5:

Table of Contents

Figure 9. Triton T1 Configuration dialog box

This dialog box displays the board serial number and allows you to

reconfigure the Clock Frequency, Digit Duration, and the Firmware

The Span Info window displays the Total Number of Spans on the

board and the status of the span in the Span Info window. To reset the

span, click the Reset Span button. Double clicking a span in this

window will invoke a configuration window, as discussed in the

following section.

See "T1 Clocking" on page 164 and the Status Messages table beginning in

the next section.

AltiWare OE System Installation & Administration Manual

Board Configuration

Troubleshooting