Altigen Altiware OE 4.5 System Administration & Installation Manual page 17

Port Identification, Facility Interface, and Service Order
Codes
The following tables list the manufacturer's network interface port
designations, Facility Interface Codes (FIC), Ringer Equivalence Number
(REN), or Service Codes and the network jacks for the required facilities.
The facility interface and service order codes are with reference to the
codes specified in Table 5 of Appendix D of FCC Form 730 Application
Guide of January 1998.
Table 1. Quantum Network Trunk Interfaces for Loop Start, Ground Start and
DID Services
Manufacturer Port Facility Interface
Identifier
ALTI-CD0408UD 02LS2
ALTI-CD0804UD 02LS2
ALTI-CD0408UD 02GS2
ALTI-CD0804UD 02GS2
ALTI-DID0408UD 02RV2-T
Table 2. Network Digital Trunk Interfaces for Digital Services
Triton T1/E1 PRI
Manufacturer Port
Identifier
ALTI-T1E1-1 04DU9-BN
ALTI-TTT1-1 04DU9-DN
ALTI-TTT1-1 04DU9-1KN
ALTI-TTT1-1 04DU9-1SN
*The Triton T1/PRI interface connects to the Public Switched Telephone
Network through an FCC registered NCTE which specifies the type of
network jack to be used.
Table 3. Triton Analog Trunk Interfaces for Loop Start/Ground Start and Loop
xvi AltiWare OE System Installation & Administration Manual
REN
Code (FIC)
0.0B
0.0B
0.0B
0.0B
0.0B
Facility Service
Interface Code Order Code
(FIC) (SOC)
6.0P/AS.2
6.0P/AS.2
6.0P/AS.2
6.0P/AS.2
Network
Jack
RJ-11C
RJ-11C
RJ-11C
RJ-11C
RJ-11C
Network
Jack
RJ-48C*
RJ-48C*
RJ-48C*
RJ-48C*