Configuring The Triton Analog Trunk Ls/Gs And Ls Boards; Triton Analog Trunk Ls/Gs And Ls Boards - Altigen MAXCS ACC 6.0 Administration Manual

Chapter 11: Board Configuration
Clicking the Board Configuration button opens a configuration dialog box that
•
displays the board's serial number, DSP clock, physical and logical IDs.
Figure 3. Board Configuration dialog box
Configuring the Triton Analog Trunk LS/GS and LS
Boards
The Triton Analog Trunk board is a long form factor PCI telephony card that supports 8
or 12 trunks. The 8 port card supports only loop start (LS). The 12 port card is available
in two models; loop start/ground start (LS/GS) and LS. Both models have the same
features regarding LS. The LS/GS board is required when ground start trunks may be
required.
Double-click the board in the Boards window to open the Board Configuration
window, similar to Figure 2 on page 116. See attribute descriptions below Figure 2. Note
the following additional information:
Double-clicking a channel in the Channel Mapping List opens a channel
•
configuration dialog box. See "Triton Analog Station Line Properties" on page 191.
Clicking the Board Configuration button opens the following dialog box that
•
displays the board's serial number, DSP clock, physical and logical IDs. For
information on adding and removing mobile trunks, see "Mobile Extension
Configuration" on page 231.
Figure 4. Board Configuration dialog box
118
MAXCS ACC 6.0 Administration Manual