Selecting Span Types
•
CAS - select this option to associate all channels on the span to channel
associated signaling.
•
Regular ISDN PRI - select this option to indicate 23B+D ISDN PRI
span and to designate the last channel as the D channel.
•
Custom ISDN PRI - select this option to set the D channel to the
desired location.
For future use: The following two settings will be used in conjunction
with the Custom ISDN PRI setting in a future release:
— Set the D Channel using the drop-down list.
— Type in a B Channel Logical Interface ID
•
Enable Tie Trunk - check this box to enable a tie trunk. Note that tie
trunks must terminate to a system also configured as a tie trunk.
AltiWare OE System Installation & Administration Manual
Board Configuration
167