Table of Contents
Advertisement
Configuring Auto Attendant
Note:
For detailed instructions, refer to Chapter 7, "Auto Attendant
Configuration," in the System Administration Manual.
1.
Run Auto Attendant.
2.
Select 0-expand tree.
Figure 14. "0 - expand tree" window
3.
Make the following entries, then click Apply.
• Type an Item Name, if desired.
• To assign a voice message, check Prompt and select the number of
the appropriate message.
• Check Push URL, and type the path of the page you want to display.
• Select Level-Expand Tree in the Actions dropdown.
AltiWare OE System Installation & Administration Manual
AltiWeb
329
Advertisement
Table of Contents
Troubleshooting
