Figure 12-14 - Depi Session Stats Window - Motorola APEX1000 Installation And Operation Manual

DEPI Session Stats Window
Use this window to displays information on the status of the DEPI sessions currently
active in the system.
For access, select View Session Status in the DEPI Status window, to display status
specific for a given control connection; alternatively, select View All Sessions to display
status for all active sessions in the system:
Item
Ses ID
Ctl ID
QAM
Local UDP
Status
Data Pkts Rcv
Data Pkts Discarded
Data Pkts Discard Seq Num
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Figure 12-14 — DEPI Session Stats window
DEPI Session Stats window field definitions
Definition/Range
Identifies the DEPI session.
Identifies the Control Connection.
Identifies the output transport stream linked to the specific DEPI
session.
Identifies the incoming UDP port linked to the specific DEPI session.
This value is only meaningful if the session is configured to run over
UDP.
Operational state for the connection, such as Established or Unknown.
Number of data packets received belonging to the specific DEPI session.
Number of data packets discarded in the specific DEPI session.
Number of Data packets discarded due to a sequence number
discontinuity in the specific DEPI session.
B
239