Routing The Scsi Cable - HP ProLiant DL145 User Manual

3. Install the SCSI controller.
Figure 4-36: Installing the SCSI controller
4. Install the PCI-X riser cage

Routing the SCSI Cable

To route the SCSI cable:
1. Disconnect the power supply cable.
Figure 4-37: Disconnecting the power supply cable
2. Route the SCSI cable in the following manner:
a. Around the power supply
b. Over the power supply connector ensuring that there is a gap between the cable and
HP ProLiant DL145 Server User Guide
the fans
CAUTION: When routing the SCSI cable in the gap between the power supply and the PCI-X
riser cage, ensure that the SCSI cable is flat across the gap so as not to interfere with proper
airflow.
Hardware Options Installation
4-23