2.
Install the hard drive into the server. Be sure that the hard drive seats firmly into the connector
in the back of the drive cage.
3.
Close the ejector lever.
4.
Determine the status of the hard drive from the hot-plug hard drive LEDs, see
SATA hard drive LEDs" (page 12)
(page
12).
Installing DVD or CD drive
The server is shipped with one DVD drive. You can install an optional DVD drive or CD drive.
To remove a DVD, CD drive or blank:
1.
Power down the server
2.
Extend the server from the rack
3.
Remove the access panel
48
Hardware options installations
and
"SAS and SATA hard drive LED combinations"
("Power down the server" (page
("Extending the server from the rack" (page
("Removing the access panel" (page
"SAS and
31)).
31)).
32)).