SAS hard drive blank
To remove the component:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To replace the blank, slide the blank into the bay until it locks into place.
Universal hot-plug tape drive
NOTE: This feature applies only to SCSI models.
To remove the component:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To replace the component, slide the drive into the bay until it locks into place.
Removal and replacement procedures 46