The following table describes the Route Table Information controls:
Route Table Information controls
The following table describes the Route Table Type parameter.
IP Routing Type information
To focus the search for an IP static route, enter search parameters:
Routes for a Destination IP
Routes to a Gateway IP
Route for an IP Interface
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for network routes specified in the Search range that meet any of the
and: Search for network routes specified in the Search range that meet all of the
Click Search to display network routes that fit the range and meet the criteria entered.
Displays the entry number for each route.
Displays the destination IP address fore the IP route.
Displays the subnet mask for the IP route.
Displays the IP address of the gateway associated with the IP route.
Displays the IP route type. See the IP Routing Type information table for more detail.
Displays the IP route tag. See the IP Routing Tag information table for more detail.
Displays the value of the IP route metric.
Displays the interface number associated with the IP route.
The next hop to the host or subnet destination will be forwarded through a router at
the Gateway address.
Packets will be delivered to a destination host or subnet attached to the switch.
Indicates a route to one of the switch's IP interfaces.
Indicates a broadcast route.
The destination belongs to a host or subnet which is filtered out. Packets to this
destination are discarded.
Indicates a multicast route.