Route Map Dashboard
To display the following form, select Layer 3 > Route Maps (click the underlined text, not the folder).
The following table describes the Route Map Dashboard controls:
Route Map Dashboard controls
Route Map Identifier
Access List ID
Numeric identifier for the route map.
The precedence of the route map. The smaller the value, the higher the
The type of OSPF metric. The default is type 1.
1—External routes are calculated using both internal and external metrics.
2—External routes are calculated using only the external metrics. Type 2 routes have
more cost than Type 2.
none—Removes the OSPF metric.
Metric of the matched route.
Status of the route map: enabled or disabled.
Numeric identifier of the access list.
Number of the network filter assigned to this access list.
Metric value in the AS-External (ASE) LSA.