Switch Image and Configuration Management
To display the following form, select System > Config/Image Control.
The following table describes the Switch Image and Configuration Dashboard controls:
Switch Image and Configuration Dashboard controls
Active Image Version
Next Boot Image Selection
Image 1 Version
Image 2 Version
Active Configuration Block
Next Boot Configuration Block Selection
Displays the number of the active software image.
Displays which software image (image1 or image2) will be loaded
into switch memory for the next reboot.
Displays information about the current Image 1 software.
Displays information about the current Image 2 software.
Displays the version number of the current Boot software.
Defines which configuration block is selected for the currently running
Allows the user to select the configuration block to be loaded upon the