Download  Print this page

HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual Page 168

Hp 10gb ethernet bl-c switch browser-based interface reference guide.
Hide thumbs

Advertisement

Table 108
Switch Port Configuration controls
Control
PVID Tagging
Port STP
Default Port VLAN ID (1-4094)
Flow Control
Autonegotiation
Speed
Duplex mode
Enable/Disable sending Link UP/Down
Trap
Port Name
Multicast Threshold
Multicast Threshold Rate (0-262143)
Broadcast Threshold
Broadcast Threshold Rate (0-262143)
Destination Look Up Fail Threshold
Description
Disables or enables VLAN tag persistence. When disabled, the VLAN
tag is removed from packets whose VLAN tag matches the port PVID. The
default value is enabled.
Turns Spanning Tree On or Off for this port.
Sets the default VLAN number which will be used to forward frames
which are not VLAN tagged.
The default number is 1.
NOTE:
VLAN 4095 is reserved for switch management.
Sets the flow control. The choices include:
Receive flow control
Transmit flow control
Both receive and transmit flow control (default)
No flow control
Enables or disables auto-negotiation for the port.
All downlink and uplink ports are fixed at 10000 Mbps, and
NOTE:
cannot be set to auto-negotiate.
Sets the link speed.
NOTE:
All downlink and uplink ports are fixed at 10000 Mbps, and
cannot be changed. Management port 17 is fixed at 100 Mbps.
Sets the operating mode, as follows:
Full-duplex
All ports are fixed at full duplex, and cannot be changed.
NOTE:
Enables or disables the sending of SNMP link up and link down traps.
The default setting is enabled.
Sets a name for the port. The assigned port name appears next to the
port number on some information and statistics screens.
Enables or disables multicast threshold limit.
Limits the number of multicast packets to the specified value. If disabled
(dis), the port forwards all multicast packets.
Configures the threshold rate for multicast packets, in packets per
second.
Enables or disables broadcast threshold limit.
Limits the number of broadcast packets to the specified value. If disabled
(dis), the port forwards all broadcast packets.
Configures the threshold rate for broadcast packets, in packets per
second.
Enables or disables threshold limit for destination lookup failures.
Limits the number of unknown unicast packets to the specified value. If
disabled (dis), the port forwards all unknown unicast packets.
Configuring the switch
168

Advertisement

Table of Contents

   Related Manuals for HP 445860-B21 - 10Gb Ethernet BL-c Switch

Comments to this Manuals

Symbols: 0
Latest comments: