Download  Print this page

Ntp Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Hp 10gb ethernet bl-c switch browser-based interface reference guide.
Hide thumbs

Advertisement

NTP Configuration

To display the following form, select System > NTP.
This form enables you to synchronize the switch clock to a Network Time Protocol (NTP) server. By
default, this option is disabled.
The following table describes NTP Configuration controls:
NTP Configuration controls
Table 103
Control
NTP Server IP Address
Transfer Port of Primary Server
Secondary NTP Server IP Address
Transfer Port of Secondary Server
Resync Interval (1-44640)
Enable/Disable NTP Service
Description
Configures the IP address of the primary NTP server to which you want to
synchronize the switch clock.
Configures the type of port used for data transfers between the switch and the
primary NTP server.
Configures the IP address of the secondary NTP server to which you want to
synchronize the switch clock.
Configures the type of port used for data transfers between the switch and the
secondary NTP server.
Specifies the interval, that is, how often, in minutes (1-44640), to re-
synchronize the switch clock with the NTP server.
Enables or disables the NTP synchronization service.
Configuring the switch
158

Advertisement

Table of Contents

   Related Manuals for HP 445860-B21 - 10Gb Ethernet BL-c Switch

Comments to this Manuals

Symbols: 0
Latest comments: