Download  Print this page

Bootstrap Protocol Relay Configuration; Ip Routing General Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Hp 10gb ethernet bl-c switch browser-based interface reference guide.
Hide thumbs

Advertisement

Bootstrap Protocol Relay Configuration

To display the following form, select Layer 3 > Bootstrap Protocol Relay.
The following table describes the Bootstrap Protocol Relay configuration controls:
Bootstrap Protocol Relay Configuration controls
Table 171
Control
BOOTP Server IP Address
Secondary BOOTP Server
IP Address
BOOTP State

IP Routing General Configuration

To display the following form, select Layer 3 > General.
Description
Sets the IP address of the BOOTP server.
Sets the IP address of the secondary BOOTP server.
Enables or disables the use of BOOTP. If you enable BOOTP, the switch will query its
BOOTP server for all of the switch IP parameters. The default value is enabled.
Configuring the switch
246

Advertisement

Table of Contents

   Related Manuals for HP 445860-B21 - 10Gb Ethernet BL-c Switch

   Related Content for HP 445860-B21 - 10Gb Ethernet BL-c Switch

Comments to this Manuals

Symbols: 0
Latest comments: