The following table describes the ARP Cache Information controls:
ARP Cache Information controls
Show Entries of a Specific Source Port
Show Entries of a Specific VLAN
Show Entry of a Specific IP Address
Clear ARP Cache
The Flags field is interpreted as follows:
ARP Dump Flag Parameters
Displays ARP entries for the selected port(s).
Displays ARP entries for the selected VLAN.
Displays a single ARP entry by IP address.
Clears the ARP data cache.
Displays the numeric identifier of the ARP entry.
Displays the IP address of the ARP entry.
Displays the MAC address of the ARP entry.
Displays the VLAN number of the port where the ARP entry request
Displays the source port of the ARP entry.
Displays the address status flag for the ARP entry.
Permanent entry created for switch IP interface
Indirect route entry
Unresolved ARP entry. The MAC address has not been learned.