Download  Print this page

Vrrp General Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Hp 10gb ethernet bl-c switch browser-based interface reference guide.
Hide thumbs

Advertisement

VRRP General Configuration

To display the following form, select Layer 3 > Virtual Router Redundancy Protocol > General.
The following table describes the VRRP General Configuration controls:
VRRP General Configuration controls
Table 169
Control
VRRP Processing Enabled?
VRRP virtual router tracking
increment (0-254)
VRRP IP interface tracking
increment (0-254)
VRRP VLAN switch port
tracking increment (0-254)
VRRP Virtual Router
Group Configuration
Virtual Router Identifier (1-250) Assigns a numeric identifier to the virtual router group.
IP interface (1-249)
Enabled?
Descriptions
Globally enables or disables VRRP processing.
Defines the priority increment value (1 through 254) for virtual routers in master
mode detected on this switch. The default value is 2.
Defines the priority increment value (1 through 254) for active IP interfaces
detected on this switch. The default value is 2.
Defines the priority increment value (1 through 254) for active ports on the virtual
router's VLAN. The default value is 2.
Defines the IP interface associated with the virtual router group.
Enables or disables the virtual router group.
Configuring the switch
243

Advertisement

Table of Contents

   Related Manuals for HP 445860-B21 - 10Gb Ethernet BL-c Switch

Comments to this Manuals

Symbols: 0
Latest comments: